It is important that the steps below are followed and that update compatibility is secured prior to making any update.
AN UPGRADE CAN NOT BE REVERTED! 


Click for firmware version history


Before you upgrade

Make sure you have 

  • Your ReaderPen
  • A micro-USB cable
  • A computer (MAC, Windows or Linux)


Check

  • Current ExamReader software version and internal memory


Go to Settings/System Information/Version and check Software version.

Go to Settings/System Information/Internal Storage and check Internal memory (4GB or 8GB).



Upgrade options

Each upgrade may take 5-20 minutes to complete.


In case upgrade fails - check our troubleshooting guide.



Current firmware versionInternal memory requirementUpgrade
7.0.1088GBLatest version
7.0.1078GBUpgrade to 7.0.108 available
7.0.103 or 7.0.106
8GB
Upgrade to 7.0.107 available
7.0.102
8GB
Upgrade to 7.0.103 available
7.0.100
8GB
Upgrade to 7.0.102 available
7.0.97 or 7.0.988GBUpgrade to 7.0.100 available
7.0.898GBUpgrade to 7.0.97 available
7.0.76 or 7.0.868GBUpgrade to 7.0.89 available
7.0.69, 7.0.76, 7.0.86 and 7.0.894GBNOT possible to upgrade
7.0.51 or 7.0.52 or 7.0.634GBUpgrade to 7.0.69 available


ReaderPen upgrades are incremental and it is required to walk through them all starting from the version currently installed.


Upgrade to 7.0.108

Current version MUST be 7.0.107


Download: 7.0.108 upgrade file

  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy updatesys_7.0.108.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.


Upgrade to 7.0.107

Current version MUST be 7.0.103 or 7.0.106


Download: 7.0.107 upgrade file

  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy sysdict.BIN and updatesys_7.0.107.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.


Upgrade to 7.0.103

Current version MUST be 7.0.102

Download: 7.0.103 upgrade file



  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy sysdict.BIN and updatesys_7.0.103.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.


Upgrade to 7.0.102

Current version MUST be 7.0.100


This is a large upgrade and needs to be processed through three (3) iterations.


Download: 7.0.102 upgrade file

  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy \[..]\step1\sysdict.BIN and \[..]\step1\updatesys_7.0.102.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.


Repeat step 2-7 and for each iteration, replace the files in step 4 with 

\[..]\step2\sysdict.BIN

\[..]\step3\sysdict.BIN


Upgrade to 7.0.100

Current version MUST be 7.0.97 or 7.0.98


Download: 7.0.100 upgrade file


  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy \[..]\step1\sysdict.BIN and \[..]\step1\updatesys_7.0.100.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.



Upgrade to 7.0.97

Current version MUST be 7.0.89


Download: 7.0.97 upgrade file


  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy \[..]\step1\sysdict.BIN and \[..]\step1\updatesys_7.0.97.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.



Upgrade to 7.0.89

Current version MUST be 7.0.76 or 7.0.86


Download: 7.0.89 upgrade file


  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy \[..]\step1\sysdict.BIN and \[..]\step1\updatesys_7.0.89.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.




Upgrade to 7.0.69

Current version MUST be 7.0.51, 7.0.52 or 7.0.63


Download: 7.0.69 upgrade file


  1. Unzip the downloaded file.
  2. Power up ReaderPen and connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy \[..]\step1\sysdict.BIN and \[..]\step1\updatesys_7.0.69.BIN to your ReaderPen.
  5. Eject ReaderPen disk from your computer and detach the USB cable.
  6. On ReaderPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.