Firmware is updated via Wi-Fi.


Step 1 - Connect pen to Wi-Fi

  1. Press BACK button a few times until display shows the main menu.
  2. Press M button to access quick menu.
  3. Tap the Wi-Fi icon to take you to Wi-Fi settings.
  4. If Wi-Fi is off, tap the toggle in the upper right corner and set Wi-Fi to ON.
  5. A list of networks show up. Scroll to find your preferred one and tap it.
  6. You shall now be prompted to fill in a password. Use keyboard and enter password.
  7. In upper right corner, tap to confirm and wait for Wi-Fi to connect.

Step 2 - trigger update

  1. Press BACK button a few times until display shows the main menu.
  2. Use touch or buttons to move far right on the screen to Settings.
  3. Tap Settings (or press OK button).
  4. Scroll down to System Settings - tap it, or press OK button.
  5. Scroll down to Software upgrade, and select by tapping the screen or pressing OK button.
  6. Confirm to upgrade.


NOTE: battery level needs to be over 50% to complete an update.

Watch OTA video