It is important that the steps below are followed and that update compatibility is secured prior to making any update.
AN UPGRADE CAN NOT BE REVERTED!


Click for firmware version history

Before you upgrade

Make sure you have 

  • Your ReaderPen Secure
  • A micro-USB cable
  • A computer (MAC, Windows or Linux)


Check

  • Current ReaderPen Secure software version


Go to Settings/System Information/Version and check Software version



Upgrade options

Each upgrade may take 5-20 minutes to complete.


If upgrade fials - read the upgrade troubleshooting guide.


Current firmware versionInternal memory requirementUpgrade
7.4.068GBLatest version
7.4.038GBUpdate to 7.4.06 available
7.4.01
8GB
Upgrade to 7.4.03 available



Upgrade to 7.4.06

Current version MUST be 7.4.01 or higher


Download: 7.4.06 upgrade file

  1. Unzip the downloaded file.
  2. Power up ReasderPen Secureand connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy updatesys_7.4.03.BIN to your ReaderPen Secure.
  5. Eject ReaderPen Secure disk from your computer and detach the USB cable.
  6. On LingoPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.

Upgrade to 7.4.03

Current version MUST be 7.4.01


Download: 7.4.03 upgrade file

  1. Unzip the downloaded file.
  2. Power up ReasderPen Secureand connect it by USB to your computer.
  3. Use nav-buttons and select U-Disk. Press OK button to confirm.
  4. Locate your unzipped upgrade file on your computer and copy updatesys_7.4.03.BIN to your ReaderPen Secure.
  5. Eject ReaderPen Secure disk from your computer and detach the USB cable.
  6. On LingoPen, navigate to Settings/Software upgrade
  7. Press OK button to select and use nav button to select YES and press OK button again.